THOR MOTOR COACH HURRICANE 29M Common Problems and Troubleshooting

In this article, we will discuss some common problems that users may encounter with the THOR MOTOR COACH HURRICANE 29M and provide troubleshooting solutions. It’s important to note that not all of these problems are guaranteed to occur in every vehicle, but they are potential issues that owners might face.

Tire blowouts or uneven wear

• Description of the problem: Tire blowouts or uneven wear can cause a loss of control and compromise the safety of the vehicle.
• Cause of the problem: Common causes include overloading, underinflation, misalignment, or worn-out tires.
• Solution to the problem: Regularly inspect tires for proper inflation and wear. Ensure tires are properly aligned and replace them when necessary.

Chassis suspension issues

• Description of the problem: Chassis suspension issues can lead to a rough and uncomfortable ride, poor handling, or uneven tire wear.
• Cause of the problem: Causes can include worn-out suspension components, improper alignment, or damaged shocks.
• Solution to the problem: Have the suspension system inspected by a qualified technician. Replace any worn-out or damaged components and ensure proper alignment.

Water system leaks or plumbing issues

• Description of the problem: Water system leaks or plumbing issues can result in water damage, reduced water pressure, or malfunctioning fixtures.
• Cause of the problem: Causes can include loose connections, damaged pipes, or faulty plumbing fixtures.
• Solution to the problem: Inspect all water connections and fixtures for leaks or damage. Tighten loose connections and replace any damaged components.

Electrical system malfunctions

• Description of the problem: Electrical problems such as wiring disconnections or malfunctioning electrical devices can lead to power outages or equipment failures.
• Cause of the problem: Causes can include loose or damaged wiring, faulty electrical devices, or overloaded circuits.
• Solution to the problem: Check all wiring connections for tightness and damage. Replace any faulty electrical devices and ensure circuits are not overloaded.

Generator problems

• Description of the problem: Generator problems can result in a failure to start, inadequate power output, or intermittent operation.
• Cause of the problem: Causes can include fuel delivery issues, clogged filters, electrical malfunctions, or low oil levels.
• Solution to the problem: Check fuel levels and ensure proper fuel delivery. Clean or replace clogged filters. Inspect electrical connections and components. Maintain the recommended oil level and change the oil regularly.

Sealant degradation or failure

• Description of the problem: Sealant degradation or failure can result in water leaks, which can lead to water damage and other issues.
• Cause of the problem: Causes can include exposure to UV rays, temperature changes, aging, or improper application of sealant.
• Solution to the problem: Inspect all sealant areas regularly and reapply sealant as needed. Use high-quality sealants suitable for the specific application.

Mold and rotting wood

• Description of the problem: Mold and rotting wood can occur due to water leaks or excessive moisture, leading to structural damage and health hazards.
• Cause of the problem: Causes can include water leaks, inadequate ventilation, or prolonged exposure to moisture.
• Solution to the problem: Identify and repair any water leaks promptly. Improve ventilation in affected areas. Remove and replace moldy or rotted wood and address the source of moisture.

Interior and exterior water damage

• Description of the problem: Interior and exterior water damage can result from leaks, causing structural damage, mold growth, or cosmetic issues.
• Cause of the problem: Causes can include faulty seals, damaged roof or windows, plumbing leaks, or inadequate drainage systems.
• Solution to the problem: Inspect the RV regularly for signs of water damage. Repair or replace damaged seals, windows, or plumbing components. Improve drainage systems to prevent water accumulation.

Furnace or water heater malfunctions

• Description of the problem: Furnace or water heater malfunctions can result in inadequate heating, inconsistent temperature control, or complete failure.
• Cause of the problem: Causes can include ignition issues, clogged burners, fuel supply problems, or malfunctioning thermostats.
• Solution to the problem: Check for proper ignition and clean or replace clogged burners. Ensure proper fuel supply and address any fuel delivery issues. Inspect and calibrate thermostats as needed.

Slide-out mechanism failures

• Description of the problem: Slide-out mechanism failures can result in the slide-out room not extending or retracting properly, sticking, jamming, or making unusual noises.
• Cause of the problem: Causes can include damaged gears, broken cables, motor malfunctions, or misalignment.
• Solution to the problem: Inspect the slide-out mechanism for any damaged or broken components. Lubricate moving parts as recommended. Replace faulty gears, cables, or motors. Ensure proper alignment of the slide-out room.

Paint or clear coat peeling or fading

• Description of the problem: Paint or clear coat peeling or fading can lead to cosmetic issues, reduced protection against the elements, and potential rusting.
• Cause of the problem: Causes can include exposure to UV rays, harsh weather conditions, improper paint preparation, or low-quality paint/coating.
• Solution to the problem: Repaint or apply a new clear coat to affected areas. Properly prepare the surface and use high-quality paint/coating suitable for outdoor use. Regularly wash and wax the RV to protect the paint.

Fuel system problems

• Description of the problem: Fuel system problems can result in poor fuel efficiency, difficulty starting the engine, or engine stalling.
• Cause of the problem: Causes can include clogged fuel filters, fuel pump issues, contaminated fuel, or malfunctioning sensors.
• Solution to the problem: Replace clogged fuel filters regularly. Check and replace a faulty fuel pump if necessary. Use high-quality fuel and consider adding a fuel additive to clean the system. Have malfunctioning sensors diagnosed and repaired by a qualified technician.

Issues with slide-out elements

• Description of the problem: Issues with slide-out elements include sticking, failure to open or retract, jamming, or problems with the switch.
• Cause of the problem: Causes can include debris or obstructions, misalignment, faulty wiring, motor malfunctions, or damaged gears.
• Solution to the problem: Clear any debris or obstructions from the slide-out mechanism. Ensure proper alignment and lubricate moving parts. Check the wiring and connections for any damage or loose connections. Replace faulty motors or gears as needed.

Battery charging system failures

• Description of the problem: Battery charging system failures can result in insufficient power supply, dead batteries, or inability to recharge the batteries.
• Cause of the problem: Causes can include faulty converters, damaged wiring, blown fuses, or malfunctioning battery chargers.
• Solution to the problem: Inspect the converters, wiring, and fuses for any damage or signs of malfunction. Replace faulty components. Ensure proper connections and wiring of the battery charger. Test the charging system to ensure proper functioning.

Awning problems

• Description of the problem: Awning problems can include difficulty retracting or extending the awning, fabric tears, or motor failures.
• Cause of the problem: Causes can include worn-out awning fabric, damaged motor or gears, faulty switches, or electrical malfunctions.
• Solution to the problem: Inspect the awning fabric for tears or damage and replace if necessary. Check the motor, gears, and switches for any faults or damage. Repair or replace as needed. Ensure proper electrical connections and address any electrical malfunctions.

Roof leaks

• Description of the problem: Roof leaks can lead to water damage, mold growth, and structural issues.
• Cause of the problem: Causes can include damaged roof seals, cracked or punctured roof material, or improper installation.
• Solution to the problem: Inspect the roof for any damaged seals, cracks, or punctures. Repair or replace damaged areas. Ensure proper installation of roof components and seals.

Hydraulic system leaks

• Description of the problem: Hydraulic system leaks can result in reduced functionality of hydraulic components, such as leveling jacks or slide-out mechanisms.
• Cause of the problem: Causes can include damaged hydraulic hoses, loose connections, or faulty seals.
• Solution to the problem: Inspect hydraulic hoses and connections for any signs of leaks or damage. Tighten loose connections and replace damaged hoses or seals. Ensure proper hydraulic fluid levels and address any fluid leaks promptly.

Leveling jack malfunctions

• Description of the problem: Leveling jack malfunctions can result in uneven RV leveling or jacks failing to retract or extend.
• Cause of the problem: Causes can include hydraulic system issues, damaged jacks, faulty controls, or electrical malfunctions.
• Solution to the problem: Inspect the hydraulic system, jacks, and controls for any faults or damage. Repair or replace damaged components. Ensure proper hydraulic fluid levels and address any hydraulic system issues. Test the controls and electrical connections for proper functioning.

Electrical panel or circuit breaker issues

• Description of the problem: Electrical panel or circuit breaker issues can result in power outages or failure of electrical devices.
• Cause of the problem: Causes can include tripped circuit breakers, faulty electrical panels, overloaded circuits, or loose connections.
• Solution to the problem: Check the circuit breakers and reset any tripped breakers. Inspect the electrical panel for any signs of damage or malfunction. Replace faulty electrical panels or breakers. Ensure proper distribution of electrical load and avoid overloading circuits. Tighten any loose connections.

Air conditioning and heating failures

• Description of the problem: Air conditioning and heating failures can result in inadequate cooling or heating, inconsistent temperature control, or complete system malfunctions.
• Cause of the problem: Causes can include faulty thermostats, compressor issues, refrigerant leaks, or electrical malfunctions.
• Solution to the problem: Inspect thermostats and replace faulty ones. Check the compressor and refrigerant levels for any issues. Repair any refrigerant leaks and recharge the system as needed. Test the electrical components for proper functioning and address any malfunctions.

Issues or faulty water pump

• Description of the problem: Issues or a faulty water pump can result in a lack of water pressure or the pump not functioning properly.
• Cause of the problem: Causes can include clogged filters, damaged pump motor, airlock in the system, or electrical malfunctions.
• Solution to the problem: Check and clean the filters to ensure proper water flow. Inspect the pump motor for any damage or faults. Bleed the air from the system if there is an airlock. Test the electrical connections and components for any malfunctions.

Freshwater tank problems

• Description of the problem: Freshwater tank problems can include leaks, filling issues, or contamination of the water supply.
• Cause of the problem: Causes can include damaged tank, faulty valves or connections, improper filling procedure, or water contamination.
• Solution to the problem: Inspect the freshwater tank for any leaks or damage and repair or replace as needed. Check valves and connections for proper functioning and address any faults. Follow the correct procedure for filling the freshwater tank. Test the water for contamination and address any issues.

Exterior water damage

• Description of the problem: Exterior water damage can occur due to leaks, damaged seals, or improper drainage, leading to structural damage and cosmetic issues.
• Cause of the problem: Causes can include faulty seals, damaged exterior components, inadequate drainage systems, or improper installation.
• Solution to the problem: Inspect the exterior of the RV for any signs of water damage, including seals and exterior components. Repair or replace any faulty seals or damaged components. Improve the drainage systems to prevent water accumulation. Ensure proper installation of exterior components.

THOR MOTOR COACH HURRICANE 29M User Reviews

Here are three user reviews highlighting their experiences with the THOR MOTOR COACH HURRICANE 29M:

“The THOR MOTOR COACH HURRICANE 29M has exceeded my expectations! The spacious interior and comfortable amenities make it perfect for long trips.”

“I’ve had some minor issues with the electrical system, but overall, the THOR MOTOR COACH HURRICANE 29M provides a smooth and enjoyable ride.”

“The slide-out mechanism in my THOR MOTOR COACH HURRICANE 29M had some initial problems, but the responsive customer support helped me resolve them quickly.”

Conclusion

While the THOR MOTOR COACH HURRICANE 29M may have its share of potential problems as listed in this article, it’s essential to remember that not all vehicles will experience these issues. Regular maintenance, proper usage, and timely repairs can significantly minimize the likelihood of encountering these problems. It’s always a good idea to consult with a professional or contact the manufacturer for specific troubleshooting advice if you encounter any difficulties with your THOR MOTOR COACH HURRICANE 29M.